User login

Enter your username and password here in order to log in on the website:


18th meeting of Joint Committee for Measurement Standards:

31 March 2020, Kazakhstan



30th COOMET Committee meeting:

1-2 April 2020, Nur-Sultan, Kazakhstan

29th COOMET Committee meeting

29th COOMET Committee meeting was held on 3-4 April 2019 in Dresden, Germany. Specialists from 16 countries (Armenia, Belarus, Bosnia and Herzegovina, Germany, Georgia, Kazakhstan, China, Cuba, Kyrgyzstan, Lithuania, Moldova, Russia, Slovakia, Tajikistan, Uzbekistan, Ukraine) took part in the event, as well as representatives of international metrology organizations (Bureau International des Poids et Mesures – BIPM, International Organization of Legal Metrology - OIML) and representatives of regional metrology organizations (EURAMET, WELMEC and APMP). Representatives of the State Etalons Centre of the Major State Service «Turkmenstandartlary» attended the meeting as guests.


COOMET Committee approved the Regulation on the Working Group for Preparation of the COOMET Development Strategy and its membership (Mr. Valery Hurevich, COOMET President, was appointed as the Chairperson of the Working Group). It was agreed during the meeting to prepare till the end of the year 2019 a draft COOMET Development Program for 2020-2022 and to conduct a survey/interview of the participants of cooperation within COOMET for the purposes of the external assessment STATUS AND PERSPECTIVES OF COOMET» performed within the framework of the PTB-COOMET project «Assistance to regional trade and support of consumer rights protection for COOMET member-countries».


The following decisions were made with regard to COOMET structural bodies:

1) to suspend the activities of TC5 «Joint research in the field of metrology»;

2) to change the name of SC 4.1 to «Capacity building in education and knowledge transfer « and to appoint Mrs. Yulia Bunyaeva (NSC «IM», Ukraine) as its Chairperson;

3) to extend the term of office of the Chairpersons of the following Technical Committees for 4 years:

   - Joint Committee for Measurement Standards: Mrs. Anna Chunovkina (VNIIM, Russia);

   - TC 1.1 «General questions concerning measurements (General Metrology)»: Mrs. Anna Chunovkina (VNIIM, Russia);

   - TC 1.4 «Flow measurement»: Mr. Victor Fafurin (VNIIR, Russia);

   - TC 1.9 «Ionizing radiation and radioactivity»: Mr. Nikolai Moiseev (VNIIM, Russia).

   - TC 4 «Information and training»: Mr. Pavel Neyezhmakov (NSC «IM», Ukraine);

4) to extend the term of office of the Chairpersons of a number of Subcommittees within TC 1.5, TC 1.6, TC 1.8 and TC 2 for 1 year.


COOMET Committee requested the COOMET President to sign on behalf of COOMET an updated Protocol of cooperation and interaction in the field of metrology between COOMET and EASC (signing shall take place in June 2019 at the nest EASC meeting).


During the meeting of the COOMET Committee the results of work of COOMET structural bodies over the past year were considered, in particular in terms of implementation of CIPM MRA (review of CMCs, comparisons of national measurement standards, evaluation of Quality Management Systems (QMS) of National Metrology Institutes (NMI) and Designated Institutes (DI) of COOMET member countries etc.), legal metrology, information and training of metrologists, as well as various events held under the auspices of COOMET in 2018-2019.


Taking into account the 26th CGPM meeting held in November 2018, the Resolutions of CGPM were discussed regarding redefinition of the SI units and tasks of COOMET structural bodies and NMIs of COOMET member countries, related to these resolutions. It was agreed to hold a workshop «Redefinition of the International System of Units (SI)» in October 2019 at the premises VNIIM named after D.I. Mendeleev, Saint Petersburg, Russia, and to translate the Brochure «The International System of Units (SI)» (version of 2019) into the Russian language following its official publication on the BIPM website.


In connection with the expected revision of the Mutual Recognition Arrangement COOMET Committee supported a proposal of the Chairperson of the Joint Committee for Measurement Standards to start a COOMET project «Translation and introduction in COOMET practice of a package of new versions of the CIPM MRA documents, including CIPM document «Recommendations of the Working Group for CIPM MRA implementation and application». Extended discussion took place concerning APMP proposals on carrying out hybrid comparisons – it was suggested to discuss this issue both in CIPM Consultative Committees and in COOMET TCs.


An updated version of the COOMET Program of Comparisons (as of 3 April 2019) was signed by the COOMET President.


COOMET Committee supported previously approved by the COOMET Presidential Council Policy and Plan of the Technical Committee of the COOMET Quality Forum related to the transition to ISO 17034:2016 and ISO/IEC 17025:2017 for the evaluation of QMS of COOMET NMIs and Dis, as well as Work Program of TC2 «Legal Metrology» for 2019-2020.


The participants were informed about preparation for the VIII International Competition «The Best Young Metrologist of COOMET – 2019» (5-6 June 2019, Kazan, Russia). Young metrologists of all COOMET NMIs and DIs are invited to participate in the competition. Scientific and practical conference on current problems of metrology will be held together with the competition.


The following COOMET publications were approved by the COOMET Committee:

- Document COOMET D7/2019 «Regulation on giving the distinguished title of «Honorary metrologist of COOMET»;

- Information Material CООМЕТ I/LM/8:2019 «Overview on the progress with prepackages control in COOMET member countries»;

- Information Material CООМЕТ I/LM/9:2019 «Metrological Supervision performed by metrological services of legal entities. General Principles»;

- Recommendation CООМЕТ R/AQ/9:2019 «Recommendation on the evaluation of Quality Management Systems of National Metrology Institutes» with Annexes;

- Recommendation CООМЕТ R/AQ/13:2019 «Rules and Procedure for the Evaluation of Quality Management Systems of National Metrology Institutes of COOMET» with Annexes.


Representatives of BIPM, OIML, EURAMET, WELMEC and APMP delivered reports on activities of the above mentioned organizations.


For the considerable personal contribution to work and activities of COOMET the Distinguished Title «Honorary Metrologist of COOMET» was given to the following specialists of the organizations of COOMET-member countries: Mr. Kamo Movsisyan (Armenia); Mrs. Annettee Kögler (Germany), Mr. Toktabek Tokanov (Kazakhstan), Mr. Vladimir Krutikov (Russia), Mr. Jurakhon Rahimzoda (Tajikistan); Mr. Georgy Leonov (Ukraine). During the meeting Breastplates were solemnly awarded.


The following COOMET Committee meeting will be held in April 2020 in Kazakhstan.


A training seminar within the framework of the BIPM Capacity Building & Knowledge Transfer Program (CB&KT) for the Chairpersons of TC 1.1 – TC 1.12, TC 3.1 due to the expected revision of the CIPM MRA Agreement was held on 2nd April 2019, before the COOMET Committee meeting.


Link to 29th COOMET Committee meeting page

Last Update: 27.01.2020 | Disclaimer & Copyright | Print-Version
twitter facebook google