21.02.2024: 20th meeting of TC 1.9 "Ionizing Radiation and Radioactivity"

 

27.02.2024: BIPM training on e-learning for administrators and course creators

WELMEC WG 8

Document                             Annotation Text of the document

WELMEC 8.0 (2016)

Notified Bodies Directive 2014/31/EC and Directive 2014/32/EC Generalities on the Assessment and Operation

The guide must be considered as the general guide on the assessment and operation of notified bodies performing conformity assessment in application of Measuring Instruments Directive 2014/32/EU (MID) and Non-automatic Weighing Instruments Directive 2014/31/EU (NAWID).

This guide gives guidance on the use of particular quality standards within the EN ISO/IEC 17000 series for each conformity assessment module. The overall aim is that all valid combinations of the quality standards and modules featured here is giving the same confidence in the work performed by the notified bodies.
link to the WELMEC webpage

WELMEC 8.1 (2020) Issue 2

Guide on Terms and Definitions in MID and Their Relation to Terms Defined in Other International Metrologically Relevant Documents

This document provides terms and expressions with metrological relevance in the English version of the Measuring Instruments Directive 2004/22/EC and compares these terms and expressions with those used in other relevant documents like Recommendations of the International Organization of Legal Metrology (OIML), the International Vocabulary of Metrology (VIM), and relevant international and European standards.  

WELMEC 8.2 (2018)

Guide on Terms and Definitions in MID and Their Relation to Terms Defined in Other International Metrologically Relevant Documents

This document was written to provide guidance for all those concerned with the application of the Module H1 of the Measuring Instruments Directive 2014/32/EU (MID). It provides guidance for manufacturers of measuring instruments and notified bodies responsible for conformity assessment.  

WELMEC 8.3 (2017)

Application of Module B: EU-type Examination Under Directive 2014/32/EU (MID) or Directive 2014/31/EU (NAWID)

This guide is intended to provide guidance to all those concerned with the application of module B, EU-type examination under Directive 2014/32/EU and Directive 2014/31/EU.  

WELMEC 8.4 (2017)

Application of Module D Quality Assurance Under Directive 2014/32/EU (MID) or Directive 2014/31/EU (NAWID)

This guide is intended to provide guidance to all those concerned with the application of Annex II Module D of Measuring Instruments Directive 2014/32/EU (MID) and Non-automatic Weighing Instruments Directive 2014/31/EU (NAWID). It provides guidance for manufacturers and notified bodies responsible for conformity assessment.  

WELMEC 8.5 (2022)

Assessment of Notified Bodies Following the EN ISO/IEC 17065

This document is intended to provide guidance in order to facilitate harmonized assessment of notified bodies (NB) following the EN ISO/IEC 17065 for the application of the following conformity assessment modules: B, D and F according to Measuring Instruments Directive 2014/32/EU (MID) and Non-automatic Weighing Instruments Directive 2014/31/EU (NAWID) and modul H1 according to Measuring Instruments Directive 2014/32/EU (MID).  

WELMEC 8.6 (2018)

Non-Automatic Weighing Instruments Directive 2014/31/EU Presumption of Conformity of the Quality System of Manufacturers with Module D when EN ISO 9001:2015 is Applied

Measuring Instruments Directive 2014/32/EU

Presumption of Conformity of the Quality System of Manufacturers with Module D or H1 when EN ISO 9001:2015 is Applied

This Guide is intended to support notified bodies when Annexes D1, E, E1 and H are used.

This Guide covers both the Measuring Instruments Directive 2014/32/EU (MID) and the Non-automatic Weighing Instruments Directive 2014/31/EU (NAWID) although small differences exist in the text of Module D of the MID compared with the text in the NAWID.
 

WELMEC 8.7 (2021)

Measuring Instruments Directive (2014/32/EU) Non-automatic Weighing Instruments Directive (2014/31/EU) Assessment of Notified Bodies Designated for Module F Based on EN ISO/IEC 17020

This document is intended to provide guidance in order to facilitate harmonised assessment of notified bodies (NB) in charge of declaration of conformity to type based on product verification that is module F of Measuring Instruments Directive 2014/32/EU (MID) and Non-automatic Weighing Instruments Directive 2014/31/EU (NAWID).

In addition, accreditation bodies are encouraged to use the provisions of this document for specific accreditation of bodies responsible for module F. It could be used also for accreditation of bodies in charge of similar conformity assessment procedures with appropriate adaptations. In particular, this guide can also be used for the assessment of Notified Bodies for module F1.
 

WELMEC 8.8 (2017)

Guide on the General and Administrative Aspects of the Voluntary System of Modular Evaluation of Measuring Instruments

This guide deals with the general and administrative aspects of the voluntary system of modular evaluation of measuring instruments under the Non-Automatic Weighing Instruments Directive (NAWID) and the Measuring Instruments Directive (MID).

This guide is only intended for the evaluation of parts that can be subject to the voluntary system of modular evaluation of the measuring instrument and should not be used as a guide for modular certification of the whole measuring instrument.

Although the system of modular approach for measuring instruments is voluntary, it is intended that the procedures as described in this guide shall be followed if Certificates are issued under the scope of this guide.
 

WELMEC 8.9 (2020)

Measuring Instruments Directive 2014/32/EU Common Application – Capacity Serving Measures (CSM)

This guide is intended to provide guidance to all those concerned with the capacity serving measures (CSM) of the Measuring Instruments Directive (MID). It provides guidance for manufacturers of measures and notified bodies (NBs) responsible for conformity assessment.  

WELMEC 8.10 (2018)

Measuring Instruments Directive (2014/32/EU) Guide for Generating Sampling Plans for Statistical Verification According to Annex F and F1 of MID 2014/32/EU

This Guide is intended to assist notified bodies in creating suitable sampling plans for conformity assessment according to Annex F and F1, statistical methods may also be used for Annexes A1 or Annexes D, D1, E, E1, H and H1.

The Guide provides a practicable tool for the application of already existing documents and standards (in particular ISO 2859) with regard to Measuring Instruments Directive (MID) conditions.
 

WELMEC 8.21 (2018)

Directives 2014/31/EU and 2014/32/EU Common Application

This guide is intended to provide guidance to all those concerned with the application of Measuring Instruments Directive 2004/22/EC (MID), as amended by Directive 2009/137/EC, on measuring instruments.

In addition, this guide seeks to provide information, which is specific to individual Member States.
 
Last Update: 19.02.2024 | Disclaimer & Copyright | Print-Version
Bookmark Twitter Bookmark Facebook Bookmark Google+